UMKA | Manuals

Manuals


*doc format
Thermal insulating plaster mix UMKA® UB-21

for exterior and interior works

Insulation system lies in one bag!
Lightweight insulating plaster for silicate and hollow ceramic bases. Designed for visual thin-layer plastering of facades, interiors, slopes, balconies, basements and cellars. The recommended thickness of the layer is 5-7 mm, has a finished look "curly/ lambskin". Does not require reinforcement. Provides heat, hydro and acoustic insulation walling.

Composition
Mineral binding (cement, lime), light mineral aggregates, polymer modifying additives.



Open

*doc format
Thermal insulating plaster mix UMKA® UB-212

for exterior and interior works

Insulation system lies in one bag!
Lightweight insulating plaster for silicate and hollow ceramic bases. Designed for visual thin-layer plastering of facades, interiors, slopes, balconies, basements and cellars. The recommended thickness of the layer is 5-7 mm, has a finished look "curly/ lambskin". Does not require reinforcement. Provides heat, hydro and acoustic insulation walling.

Composition
Mineral binding (cement, lime), light mineral aggregates, polymer modifying additives.



Open

*doc format
Thermal insulating finishing plaster mix UMKA® UF-2

for exterior and interior works

Thermal insulating plaster UMKA® UF-2 is used as a finishing layer for the walls made of aerated concrete and perlite-concrete blocks, ceramic block, stone slabs of coquina, brick, metal and other materials both indoors and outdoors. Such finishing plaster is used as a decorative one. And more than that! Thanks to insulation properties UMKA® UF-2 provides heat, water and sound proofing. In texture the surface is glassy and smooth. It is specially recommended to be used for external leveling of slopes and doorways. It can also be used as glue to slabs Multipor to insulate facades.  

Composition
Mineral binding (cement, lime), light mineral aggregates, polymer modifying additives.



Open

*doc format
Thermal insulating concrete floor mix UMKA® UP-1

Thermal insulating floor mix UMKA® UP-1 is used to create the monolithic heat and sound proof screed indoors on the concrete and reinforced concrete monolithic and prefabricated foundations as well as on the soil. It can be used to make the floors with heating system. Significantly saves room height in comparison with traditional screed systems. The thickness of the layer is from 40 up to 100 mm. Any floor coating (laminate flooring, parquet, ceramic tile, linoleum, industrial carpet, etc.) can be used directly on the screed. 

Composition
Mineral binding (cement, lime), light mineral aggregates, polymer modifying additives.



Open

*doc format
Thermal insulating glue UMKA® UG-7

for exterior and interior works

Thermal insulating glue UMKA® UG-7 is used to make the exterior and interior walls and partitions from accurate gas concrete and foam concrete blocks. The increased water retention capacity of the glue gives opportunity to change the position of the blocks during placing. Particularly small particle filled composites comprising the adhesive help to minimize thickness of the masonry joints - from 2 to 5 mm. The use of the light, but very strong glue prevents formation of “cold bridges” and increases the heat engineering uniformity of the building envelope.  

Composition
Mineral binding (cement, lime), light mineral aggregates, polymer modifying additives.



Open

Top